Shoulder pads The shoulder pads consist of a hard plastic outer shell with shock-absorbing foam padding underneath. The pads fit over the shoulders and the chest and rib area, and are secured with various snaps and buckles. For comfort, shoulder pads are sometimes worn in conjunction with a shoulder pads cushion of foam rubber over a cotton half-tee.
The Safety Guys believe it works well as a guide for your safety program as well. And we know, as sure as the sun will rise, that accidents happen. Here is a recent example from literally hundreds that could have occurred in your lab. A researcher was nearly killed and the laboratory seriously damaged when a distillation flask exploded.
The researcher had performed the methanol-ether extraction hundreds of times, but apparently the ether had formed some peroxides due to age.
Since he was using only ml of material, the resulting flash fire burned out quickly. But it set his synthetic shirt on fire, as he had left his lab coat on the coat rack.
The alarm alerted a coworker down the hall, who quickly found the researcher collapsed in the hall. Source control through engineering methods can usually eliminate hazards from the workplace altogether or isolate them from workers.
Examples of engineering controls might include proper ventilation, machine guarding, hazardous product substitution, biosafety cabinets and ventilated work stations, and anesthetic gas scavenging systems, to list a few.
PPE is our last defense because it means the hazard is actually at hand—and without PPE, hazardous exposure or injury may very likely occur. PPE includes items such as gloves, lab coats, footwear, face shields, goggles, hearing protection, and respirators.
Unfortunately, the researcher in the aforementioned incident was not wearing a lab coat when the flask exploded.
If he had been, it might have provided protection and certainly would have reduced injury. This program should address the hazards present; the selection, maintenance, and use of PPE; the training of employees; and monitoring of the program to ensure its ongoing effectiveness.
Guidelines for a Good Personal Protection Program The OSHA standard requires documentation that the equipment selection is based on the hazard, employees have properly fitted equipment, they are trained on the equipment assigned, and the equipment is kept in good repair.
A good PPE program should also include regular evaluation of the program to ensure the equipment used is appropriate for the job and the employees are actually wearing and maintaining it properly.
Below we offer some tips on successfully using these major PPE program elements. Workplace survey The first step in identifying hazards and proper controls is conducting thorough workplace surveys and job hazard analyses JHA.
It is through these processes that we figure out the potential risks associated with a particular job and devise ways to control or eliminate them before an injury or accident occurs.
The JHA technique looks at the individual tasks connected to a job and then identifies controls for the hazards in each job step.
When the hazard—for example, unexpected splashes or explosions—cannot be removed or controlled adequately, PPE must be used if the work process is to continue. Determining exposure from toxic materials may be required and entails air sampling and analysis that are often best conducted by a safety and health professional.
Selection of appropriate PPE We recommend using a system that considers each body area: Protection from potential splashes into the mouth or the eyes and face might well be prevented using chemical goggles and a face shield.
Gloves should be selected that prevent skin contact and contamination. This should involve consulting chemical compatibility charts available from all major chemical glove manufacturers or distributors before a decision is made.
Employees should also be given a choice based on personal comfort and preference, where possible, of several different PPE options that meet the safety requirement. OSHA provides good assistance through the use of eTools and other guidance.
If you have safety glasses that slide down your face because they are too large, protection is lost. Respirators must fit properly, or they are ineffective. There are respirator fit test methods using specialized equipment to quantitatively assess fit or qualitative challenge tests where isoamyl acetate, saccharin, bitrex, or irritant smoke is used.
Gloves may be too large, creating entanglement hazards, or too tight. How to properly check, put on, take off, adjust, and wear assigned PPE.
There have been injuries and fatalities resulting from misunderstandings of the limits of PPE use.personal - Traduzione del vocabolo e dei suoi composti, e discussioni del forum. Personal Protective Equipment: A Good Defense. Personal protective equipment (PPE) is our last defense because it means the hazard is actually at hand.
By Vince McLeod Personal Protective Equipment, US Department of .
2 contents 1. summary of the regulations 2. introduction 3. definition of personal protective equipment 4. responsibilities of heads of department and line managers. Contact Imperial Armour for your Protective equipment and body armour.
Browse our website to view the protective equipment available. The Public Inspection page on srmvision.com offers a preview of documents scheduled to appear in the next day's Federal Register issue.
The Public Inspection page may also include documents scheduled for later issues, at the request of the issuing agency.
Personal Protective. Equipment. U.S. Department of Labor. Occupational Safety and Health Administration OSHA R.